Contents
Description
In Fig. 1, a CNC machine (of a renowned CNC machines manufacturing brand) is shown for WellPCB. We will provide you with a one-stop service and high-quality products.
You can send us the documents you need to make and get a quote immediately! What are we waiting for? We have ten years of PCB manufacturing.
The input of the PCB is a Gerber file generated after completing the PCB layout and checking the design rule check (DRC) of the PCB.
The Gerber files, which translate the Gerber files into G-code or M-code, are the machine’s input for drilling and removing the extra copper from the lamination sheet.
After removing the excess copper, the remaining tracks, vias annular ring, ground/ supply planes, and pads.
As the machine only removes copper by engraving, the vias are produced by conventional electroplating or inserting the via barrels.
The PCB quality depends on the machine type used and its accuracy. However, this method explicitly suits the RF circuits and antenna design.
Advantages of PCB Milling Machines
![Advantages of PCB Milling Machines](https://www.wellpcb.com/wp-content/uploads/Advantages-of-PCB-Milling-Machines-1200x800.jpg)
There the various advantages of PCB milling machines:
1. It does not require hazardous chemicals
2. PCBs can be produced within the lab
3. PCB fabrication is instant
4. Tracks and land patterns can be produced very accurately, such as for microwave and RF applications
5. A single machine can be used for milling, drilling, and cutting the PCB
6. The Gerber files can be directly linked to the CNC machine
7. Suitable for environments where PCBs are sufficient to be used without solder masking, through-hole plated vias and pads, and surface finishing
Disadvantages of PCB Manufacturing CNC Machines
![Disadvantages of PCB Manufacturing CNC Machines](https://www.wellpcb.com/wp-content/uploads/Disadvantages-of-PCB-Manufacturing-CNC-Machines-1200x800.jpg)
This method also has some disadvantages:
1. It is not suitable for large-scale production
2. PCB cost is high due to tool breakage
3. Spindle cooling is required for high-speed spindle machines
4. Minimum PCB track width, clearance, via size, annular ring, and minimum hole size are the design side constraints
5. A separate machining setup is required for vias and through-hole pad insertion
6. Any misalignment or deviation in drilling or milling tool causes inaccuracies in the fabricated PCBs. The PCB object’s position precision highly depends on the machine spindle and tool.
In conclusion, the large quantity of precision PCBs production best suits the wet or etching method, and minimal scale prototype testing PCBs suit using the CNC fabrication method.
![Final fabricated PCB using CNC engraving machine](https://www.wellpcb.com/wp-content/uploads/Final-fabricated-PCB-using-CNC-engraving-machine-1200x800.jpg)
Fig. 2:- Final fabricated PCB using CNC engraving machine
![Final fabricated PCBs using CNC engraving machine](https://www.wellpcb.com/wp-content/uploads/Final-fabricated-PCBs-using-CNC-engraving-machine-1200x800.jpg)
Fig. 3:- Final fabricated PCB using CNC engraving machine