Where Does One Need To Start
The next thing that should be done is to prepare the board layout. Start by finding the schematics for your diagrams and draw holes, wires, and pads for the circuit.
It would help if you then drew your schematic in the software you chose. After this, you should transfer the schematic diagram to the printed circuit board.
You also need to take your time and do everything you can to ensure that your artwork looks good.
As you do this, there are a few things that you must think about. It would help if you determined in advance whether you need to put the circuit in a box.
If your course incorporates tall components, they should be laid down flat to fit.
You need to print the details on a piece of paper and use the paper version to test whether the simple circuit board drawing you are coming up with will fit in a box.
After you are through the simple circuit board drawing process, you next need to think about how you will get your PCB manufactured.
It means that the board should be checked for errors. Once done, you can successfully convert the board layout to Giber files.
If you are satisfied with everything, you may choose an affordable manufacturer who can help you make your board.
