1. Types of solder mask
At WellPCB, we use four types of solder masks:
- Top- and Bottom-side Masks
- Epoxy Liquid Solder Masks
- Liquid Photoimageable Solder Masks
- Dry Film Photoimageable Solder Masks
We use LPI more often these days, and here is how the LPI solder mask is applied.
2. How is the LPI Solder Mask Applied?
1. The production panel is thoroughly cleaned to ensure no dust particles are trapped under the mask.
2. The panels are completely covered on both sides with the liquid mask.
3. The coated panels are placed in an oven to tack-dry the mask just enough to finish processing.
4. A film is made of your solder mask Gerber files, one for each side of the board. Where you want a show to stick to the board, the film will be transparent. Where the mask should be removed will be black in the movie.
5. The tack-dried boards are placed into a UV developer, and the film is precisely aligned over the board. The blacked-out locations on the film will prevent the UV light from curing the mask where it is not wanted.
6. After the mask is exposed to the UV lamps, the uncured cover is washed off, leaving the show only in the places needed.
